Solved [SOLVED] Using StarGO WiFi as Access Point
- sterne-jaeger
-
Topic Author
- Offline
- New Member
-
Less
More
11 Apr 2020 08:46 - 02 Jul 2020 09:46 #215
by sterne-jaeger
TSA-120 + FSQ-85 + ONTC 10"F4 + epsilon-160 + Dobson Factory 12" | Avalon Linear + M-zero | ASI 1600mm pro + ASI 6200mm pro | INDI/KStars on Intel NUC and Raspberry Pi 4
[SOLVED] Using StarGO WiFi as Access Point was created by sterne-jaeger
Dear Avalon friends,
is it possible to use the WiFi inside of the StarGO device as access point for all devices? I know I can connect to my Avalon using it's WiFi port, but I would like to connect my Raspberry Pi and my tablet to the same network. I tried it, but it looks like there is no routing and DNS available.
Any thoughts and hints?
- Wolfgang
is it possible to use the WiFi inside of the StarGO device as access point for all devices? I know I can connect to my Avalon using it's WiFi port, but I would like to connect my Raspberry Pi and my tablet to the same network. I tried it, but it looks like there is no routing and DNS available.
Any thoughts and hints?
- Wolfgang
TSA-120 + FSQ-85 + ONTC 10"F4 + epsilon-160 + Dobson Factory 12" | Avalon Linear + M-zero | ASI 1600mm pro + ASI 6200mm pro | INDI/KStars on Intel NUC and Raspberry Pi 4
Last edit: 02 Jul 2020 09:46 by Stefano82.
Please Log in or Create an account to join the conversation.
- Stefano82
-
- Offline
- Administrator
-
- Don't panic
14 Apr 2020 07:11 - 17 Apr 2020 18:37 #218
by Stefano82
Stefano
Avalon Instruments Team
Replied by Stefano82 on topic Using StarGO WiFi as Access Point
Dear Wolfgang
As it has been wrote on a previous post (click on the link below)
www.avalon-instruments.com/forum/welcome...-wifi-client?start=0
the StarGO WiFi chip use the ad-hoc protocol , that works in the peer to peer mode and it cannot works as a client, so can't be used as an access point.
Best regards
As it has been wrote on a previous post (click on the link below)
www.avalon-instruments.com/forum/welcome...-wifi-client?start=0
the StarGO WiFi chip use the ad-hoc protocol , that works in the peer to peer mode and it cannot works as a client, so can't be used as an access point.
Best regards
Stefano
Avalon Instruments Team
Last edit: 17 Apr 2020 18:37 by Stefano82.
Please Log in or Create an account to join the conversation.