- Posts: 26
- Thank you received: 5
Question M-Zero OBS belt tensionner adjustment
- G_Gagnon
- Topic Author
- Offline
- Junior Member
-
Less
More
24 Oct 2022 15:58 #1078
by G_Gagnon
M-Zero OBS belt tensionner adjustment was created by G_Gagnon
My M-Zero OBS has a slight play in the RA axis and I am assuming that it may be due to the belt requiring a small increase in belt tension. The DEC axis seems to be OK, as there is minimal play. Is there an easy procedure to adjust the tensionner to correct for the problem?
Thanks for your help.
Sincerely,
Gilles
Thanks for your help.
Sincerely,
Gilles
Please Log in or Create an account to join the conversation.
- Stefano82
-
- Offline
- Administrator
-
- Don't panic
03 Nov 2022 14:23 #1081
by Stefano82
Stefano
Avalon Instruments Team
Replied by Stefano82 on topic M-Zero OBS belt tensionner adjustment
Hi Gilles
The M-zero RA tensioner adjustment is placed on the mount RA body left side, under the L shaped lateral bracked (see attachment).
The procedure the perform the adjustment is explained on the video below.
The video refer to a M-uno mount but the procedure is the same for the M-zero mount.
Best regards
The M-zero RA tensioner adjustment is placed on the mount RA body left side, under the L shaped lateral bracked (see attachment).
The procedure the perform the adjustment is explained on the video below.
The video refer to a M-uno mount but the procedure is the same for the M-zero mount.
Best regards
Stefano
Avalon Instruments Team
Please Log in or Create an account to join the conversation.
- G_Gagnon
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 5
03 Nov 2022 21:53 #1082
by G_Gagnon
Replied by G_Gagnon on topic M-Zero OBS belt tensionner adjustment
Hello Stefano,
Thanks very much for your reply and video, it is much appreciated.
Sincerely,
Gilles
Thanks very much for your reply and video, it is much appreciated.
Sincerely,
Gilles
Please Log in or Create an account to join the conversation.