- Posts: 87
- Thank you received: 6
Question M-Uno / SG2 => Guiding with EKOS - Parameters?
- Planet30
- Topic Author
- Offline
- Premium Member
-
Less
More
24 Oct 2021 20:29 - 24 Oct 2021 20:30 #740
by Planet30
M-Uno / SG2 => Guiding with EKOS - Parameters? was created by Planet30
After slowly getting used to the INDI environment and the StarGO2 with my M-Uno, I like to try out the EKOS internal guider. What are the optimum parameters and settings? I found recommended settings for PHD2, but not (yet) for EKOS.
Last edit: 24 Oct 2021 20:30 by Planet30. Reason: Typos
Please Log in or Create an account to join the conversation.
- Planet30
- Topic Author
- Offline
- Premium Member
-
Less
More
- Posts: 87
- Thank you received: 6
24 Oct 2021 23:09 #741
by Planet30
Replied by Planet30 on topic M-Uno / SG2 => Guiding with EKOS - Parameters?
Tried different settings in EKOS. After a few 10 seconds guiding stops (“aborted”), because EKOS thinks and says that the “mount is slewing”. Very frustrating experienced. Happened several times in a row. Will try PHD2.
The whole INDI idea is OK, but I just have so many issues in combination with the STARGO2. EKOS PolarAlignmemt only works manually or not at all (no slewing), ASIAIR cannot connect correctly. CloudMaker Tools don‘t work a 100% either.
The whole INDI idea is OK, but I just have so many issues in combination with the STARGO2. EKOS PolarAlignmemt only works manually or not at all (no slewing), ASIAIR cannot connect correctly. CloudMaker Tools don‘t work a 100% either.
Please Log in or Create an account to join the conversation.