User Login
Log in
Register
Log in
Installation Tips & Troubleshooting
- StarGO2 PRO and StarGO Plus Controller internal SD System Recovery instructions:
- First connection with the StarGo Plus/StarGo2 Pro driver with N.I.N.A
- Easy direct connection with ethernet cable + USB ethernet adapter with StarGo Plus
- StarGo Plus First Web App access methods
- How to connect a PC to the StarGo Plus/StarGo2 Pro via direct Ethernet cable
- Camera connected to the StarGo Plus not detected by Ekos
- Launching the StarGo.exe, the software flash without start
- Park operation cancelled N.I.N.A. warning message issue fixed
- How to capture Comets or Asteroids using X-solver and Hnsky.
- Motorized Polar Alignment kit adjustment
- Ho to fix the mount doesn’t complete the 60° rotation required for the ASIAIR Polar Alignment procedure behaviour
- Kstars Ekos Polar Alignment with a M-zero OBS
- How to perform the Park Position procedure with the StarGo
- How to Restore the Park position in a fixed location, in case of accidentally position lost
- Avalon mounts with StarGo GoTo Control System connection with ASIair
- How to use the Realign to absolute position feature in the StarGo
- Mount slew stop before the target
- Where can i find the Mount Serial Number?
- StarGo shut down unexpectedly
- M-uno D vs Linear
- StarGo Firmware-Update accidentaly failed. StarGo led doesn’t blink anymore
- Is it possible to use the WiFi inside of the StarGO device as access point for all devices?
- 60 seconds longer time connection between StarGo and SkySafari
- Can the Motorized Polar Alignment be applied on the M-uno?
- Can i use the StarGO GoTo Control System to manage my Losmandy G11 with ESCAP P530 motors?
- StarGO power supply using
- Alt-Az Polar Alignment
- PHD2 guide parameters
- StarGo correct use and technical requirements
- X-Solver stopped to work
- Polar alignment using the new Skywatcher Polar scope
- StarGo safe connection mode
- StarGo WiFi and SkySafari instable connection issue