The StarGo2 Pro comes provided with a LCD display. Most of the informations included in the display are also available in the WebApp but some data, as the HW identifier, are not. Those informations can be only reached by looking at the LCD display.
However, there is a method that can allow the user to check the LCD display from remote, this method requires to know the StarGo2 Pro device IP and is really simple: with the StarGo2 Pro connected to the LAN, just type on the browser the StarGo2 Pro I.P. (for example: 192.168.1.28) and add the following address → AvalonUDdisplay.html as shown in the sample below: